Archive for the ‘Toy Customs’ Category
I’ve been on a bit of a Star Wars kick lately, sparked in part by realizing how awesome the current 1/6 scale offerings available are. There’s all sorts of cool clone troopers and bounty hunters and all the great, colorful characters for sale, but droids seem to get a bit of a raw deal. There’s a couple of protocol droid and astromech molds available, but they are either old cheapie Hasbro toys or outrageously overpriced Medicom toys. There are so many other great background droid designs that I love, so I decided to take matters into my own hands. The Gonk Droids, or Power Droids depending on who you ask, are such a classic, simple, goofy design that a Gonk was the obvious starting point. Read on after the jump to see some behind the scenes of my design process and lots of photos.
Read the rest of this entry »
The “My Friend the Micronaut 2013” opening sounds like it was a huge success. There are a ton of pics on the Micronaut 2013 Tumblr page now, so thanks to everyone who attended and snapped some shots! The show’s webstore is now up on the Grass Hut site for your perusal. There are three Allarounds left for $150 each and the Blockman prototype for $275. I’m pleased to say that my 3D printed figures are in good company, as they are listed right alongside the incredible works of Brownnoize Productions. Sanjeev is cranking out some incredible stuff. His Shapeways-produced Powered Suit Fake Type is an multimedia tribute to the original Diaclone Powered Suit toy. What speaks to me more, however, is his home-printed Powered Bio Suit (PBS), a Diaclone Powered Suit scaled up to Microman size. I’ve been following this project behind the scenes for a while now, and I am so excited for Sanjeev to finally be debuting such a rad project. It’s funny that we both independently came to similar conclusions with what we wanted to do with our consumer-grade 3D printers. I am sure we will be seeing some Blockman and PBS crossovers in the future. There are also some other terrific Microman-centric works for sale in vinyl, PVC, canvas paintings, and more than one other 3D printed project, so make sure to check it all out on Grass Hut’s site.
Union Fighter Blockman is an obscure little Takara line that came out in 1984 as an offshoot of Diaclone and the SF Land stuff. The line featured two inch tall plastic and metal robots covered in 5mm pegs and ports. The bots were cute little pocket warriors that could combine together and with a whole range of accessories to create everything from jets to massive gestalt robots. The story behind Blockman was that the Combination Droids were built to help human space colonists explore and settle. The Blockman sets came with little one inch tall chrome pilots with sculpts reminiscent of Diaclone drivers, which were the same size. I have always enjoyed Blockman as a fun building line with neat little bot figures, but thought that the Combination Droids could be pushed further. I also love the way the different Takara SF Land lines (Henshin Cyborg, Microman, Diaclone, …) were interconnected and related even though they were different scales, so I wanted to see how a Blockman would look scaled up to Microman (1/18) scale. While I was at it, I figured I should take advantage of the added room the large size would afford to add some new live to the design. A few days and test prints later, and the Micro-scale Blockman is ready to roll.
The fully posable Blockman features ratcheting joints in the shoulders, elbows, hips, and knees, with additional articulation at the shoulders, biceps, wrists, waist, and hips. The extra room on this huge figure gave me the opportunity to try out a couple of new articulation tricks that worked like a charm, and I could not be happier with the results. The first CD-1-L Blockman prototype is available at the “My Friend the Micronaut 2013” show at Grasshut. It’s a huge figure that takes a bit to print, but rest assured I am working around the clock to get some more made for public consumption. The best part about this guy is that he is 100% printed ABS parts, including all of the articulation. That means no more fighting with fit to existing joint parts or worrying about running out of supplies.
More details and comparison shots after the jump!
Read the rest of this entry »
“My Friend the Micronaut” is a yearly show at Grass Hut Art Market where artists from around the world display Microman/Micronaut-themed work. The show is the brainchild of Grasshut front man Bwana Spoons, who has done many Micro-themed pieces over the years. This year, I was asked to participate by show co-host Microbry, and I jumped at the opportunity. The Prometheus Rising Heavy Industries Allaround power suits are 1/18 scale, designed to look at home next to Micromen and their many robotic allies. The “Buffalo Squad” being deployed at Micronaut 2013 is the Allaround’s first release, done up in a Diaclone inspired scheme and given a proper PRS weathering treatment. These are also the first painted PRHI 3d printed figures to receive the acetone treatment, and I could not be happier with the results. Micronaut 2013 opens on August 1st, and hopefully there will be some good coverage! There are five Allaround figures, including a commander with the mag-rifle, being released at the show, and any figures not sold in person will go up on Grasshut’s online store.
I’ll be sure to put up a link to the show when it goes live. Microbry has set up a Tumblr page with details on the participating artists, and the lineup is great. Pay special attention to Brownnoize Productions. I’ve seen some of the 3D printed mecha goodness that Sanjeev is sending to the show and it is not to be missed. Also at the show will be the first completed test figure of the next Prometheus Rising Heavy Industries toy, which should blow up more than a few skirts when the photos start rolling in 😉
More pics after the jump!
Read the rest of this entry »
On Saturday, June 22 I took a trek out to the brand new Monster Kolor shop in Middleboro, Mass for one heck of a good time. I attended the ‘Paint your own TriPus’ event, hosted by Monster Kolor with blank TriPus figures supplied by Max Toy Co. The attendees ranged in skill from the talented and always fun Todd Robertson and Will Long to people who had never used an airbrush before. The weather was perfect for a bunch of toy heads to hang out in a back alley and shoot paint. Benny Kline of Tenacious Toys was nice enough to photograph the whole even and post a huge gallery of photos from the day.
I spent the drive to Massachusetts planning the paint job for my TriPus. I wanted to something with deep blue tones and a fade on the bottom to give the appearance of a monster emerging from the ocean, all realistically colored and detailed up top. Walker had a few special paints and surprises out for people to try, so I was able to stick to my plan while trying out a few sharp new colors. Click through for nice big, tasty photos of some shiny green TriPus action! The whole figure was painted on Saturday with whatever tools and colors were on hand, and served as a great warm up refresher piece while I work on unpacking my studio into my new apartment.
Read the rest of this entry »
For those asking, the Rise of the Robots show items are now available on FOE Gallery’s website. Four Bounce Tortoises went to the show for sale, and there are two remaining on their site. You can buy the 1/12 scale Bounce Tortoise Desert version and 1/24 scale Bounce Tortoise Metro version on FOE’s webstore here!
After painting the prototype 1/12 Bounce Tortoise green, it seemed obvious that the first production model would be tan. This suit has been assigned to a desert world deployment for too long and shows it. This unit also features a rotary armor piercing cannon instead of the standard beam cannon. He is on display and for sale at FOE Gallery’s Rise of the Robots Show.
Read the rest of this entry »
For the Heavy Industries line’s debut at FOE, I wanted to run the range of finishes, so I needed a mostly clean 1/12 Bounce Tortoise in something other than green or military drab. A quick look at my shelves revealed the perfect color combination from one of my favorite franchises, Macross. Funky test-type tan and orange combines mecha legitimacy with sci-fi weirdness in just the right way. The Ostrich version Bounce Tortoise is on display and for sale at FOE Gallery’s Rise of the Robots Show.
Read the rest of this entry »
The 1/24 scale Bounce Tortoise stands around four inches tall and features swivel joints at the shoulders and hips. It is the ‘Kenner Star Wars’ figure of the line, featuring simple construction with plenty of detail that fits in your coat pocket. This Tortoise is painted as a nod to my historical armor modeling with a mottled two-tone camo and more subtle weathering. It’s currently on display and available for sale at FOE Gallery’s Rise of the Robots Show.
Read the rest of this entry »
The Metro colors are intended as a S.W.A.T. team type deployment for peacekeeping use. The blue is a pearled Monster Kolor paint that has some iridescence to it even under the weathering and matte varnish. Eventually I’d like to design a less militaristic weapon arm and a siren unit for a Patrol Tortoise version for regular mecha-related law enforcement. This 1/24 scale Bounce Tortoise is on display and available for sale at FOE Gallery’s Rise of the Robots Show.
Read the rest of this entry »
Prometheus Rising Studios 